5gal. PLUSHTEX
®
SAND FILLED ASPHALT RESURFACER
Item#: 1280
UPC: 090932012806
APPLICATION GUIDE
Description
Plushtex
®
is an asbestos free bituminous emulsion fortified with specially selected aggregate fillers. It is cold
applied, and specifically designed for resurfacing new and existing hot-mix asphalt recreational courts ie. Tennis
or basketball.
Usage
Plushtex
®
is intended for use in resurfacing and minor leveling of tennis courts. Its application results in a smooth,
fine-textured base layer particularly well suited for application of all quality acrylic color systems.
Plushtex
®
serves three purposes:
a)
Use as a base/filler coating over new hot-mix asphalt tennis courts or other recreational surfaces (except roller hockey).
b)
Use as a base preparation over existing hot-mix asphalt tennis or basketball courts in need of resurfacing and/or minor repair.
c)
Use as a leveling treatment for minor blemishes and “bird baths”. It should be noted that, PLUSHTEX
®
MIXES CAN NOT
BE APPLIED IN LIFTS THICKER THAN 1/8 INCH. When leveling depressions deeper than 1/8” apply Plushtex
®
in
multiple lifts, (we don’t recommend more than two lifts) each never exceeding 1/8”. For patches deeper than 1/4”.
see “Application Guide” Section.
Physical Properties
Drying time @ 70° F & 50% relative humidity*
To the touch: 30 min – 1 hour , To top-coat: 8 hours
Weight per gallon: 11.5 lbs.
Minimum ambient, surface and product
installation temperature: 50° and rising
*Low Temperatures and high humidity will increase drying
time dramatically. Maximum surface temperature = 140°F.
Surface Preparation
Surface must meet or exceed the U.S. Tennis Court and Track Builders applicable Guidelines. Upgrading and
recoating previously colored surfaces requires the surface and base construction to be in sound condition and in
compliance with the applicable U.S.T.C. and T.B.A. Guidelines. New hot-mix asphalt surfaces must be allowed
14-28 days minimum cure time prior to application of Plushtex
®
, depending upon curing conditions.
The surface upon which Plushtex
®
is to be applied must be smooth, free of dirt, loose or flaking paint, oily
materials
or chemical residues, vegetation of any sort and any other debris or foreign matter that may prevent the
proper
product adhesion. Priming is necessary only if the existing asphalt surface is too badly weathered to
establish a strong
bond with the Plushtex
®
. Prior to application of Plushtex
®
, the court surface shall be flooded with
water and allowed
to drain. Any depressions capable of submerging a U.S. five-cent piece after one hour should be
marked and
repaired.
www.latexite.com
•
Dalton Enterprises, Inc., 131 Willow Street, Cheshire, CT 06410 USA
•
888-711-7483
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales